How to Install a Sliding Door Lock
To install a sliding door lock, gather materials (lock, screwdriver, screws, handle, latch, strike plate) and tools. Measure and mark the lock location on the door frame, drill pilot holes, and insert the lock into the holes. Then, install the strike plate on the door jamb and secure the lock with screws. Test the lock to ensure proper engagement with the strike plate. Observe safety precautions like wearing safety glasses, being cautious when drilling, and keeping tools and materials away from children.
Protect Your Sliding Door: A Beginner’s Guide to Installing a Lock
Hey there, home security enthusiasts! Ready to beef up your sliding door’s protection? I’ve got you covered. Installing a sliding door lock is a breeze, even for DIY newbies like us. Let’s dive in and make your door as safe as a bank vault!
Materials and Tools:
- Sliding door lock: The star of the show, of course.
- Screwdriver: Choose one that matches the screws on the lock.
- Handle: If it comes with a handle, make sure you have the screws too.
- Screws: Check the lock’s instructions for the right type and size.
- Latch: The little guy that keeps your door in place.
- Strike plate: The metal plate that receives the latch.
- Remember to gather all your tools and materials before you start.
Installation Process:
-
Measure and Mark the Lock’s Spot: Decide where you want the lock to live on your door frame and mark it.
-
Drill Pilot Holes: Carefully drill small holes at the marked spots using a drill bit that’s the same size as your screws.
-
Attach the Strike Plate: Line up the strike plate on the door jamb and screw it in place.
-
Install the Lock: Slide the lock into the drilled holes and tighten the screws to secure it.
-
Test the Lock: Open and close the door to make sure the lock engages with the strike plate like a champ.
Safety Precautions:
- Protect Your Peepers: Wear safety glasses to guard your eyes from any flying debris or splinters.
- Drill Smart: Pay attention to where you’re drilling so you don’t accidentally hit wires or pipes.
- Keep Tools and Materials Safe: Keep sharp tools and small parts away from kids and pets.
Remember, installing a sliding door lock is all about making your home more secure. So, grab your tools, follow these steps, and give your sliding door the protection it deserves!
How to Install a Sliding Door Lock Like a Pro
Materials and Tools
- Sliding door lock
- Screwdriver: Choose the right one for the screw heads on the lock. Life hack: Magnetic screwdrivers are a lifesaver for keeping screws in place.
- Handle: Make sure it comes with its own screws.
- Screws: Check the lock’s instructions for sizes and types.
- Latch: This keeps your door safely shut.
- Strike plate: The metal plate on the door jamb that the latch hooks onto.
- Safety tip: Gather everything you need before you start, just like a Boy Scout preparing for a camping trip.
Installation Process
Measuring and Marking
- Decide where you want your new lock. Remember to mark the spot!
- Drill pilot holes: Use a drill bit that matches the screw size and create small holes at the marked locations.
Installing the Strike Plate
- Position the strike plate on the door jamb and screw it in place. This is like securing the door’s “receiving dock.”
Installing the Lock
- Insert the lock into the pilot holes and tighten the screws. You’re now bonding the lock to the door frame like a superhero holding the line.
- Test the lock: Open and close the door. The lock should engage smoothly with the strike plate. If it’s not love at first slide, adjust the strike plate until they’re a happy couple.
Safety Precautions
- Wear safety glasses: Protect your peepers from flying splinters.
- Caution when drilling: Pay attention to where you’re drilling. Avoid drilling into wires or pipes, or you’ll be singing “Ode to the Electrician.”
- Keep tools away from kids: We don’t want any tiny explorers getting hurt.
How to Install a Sliding Door Lock: A Step-by-Step Guide
Hey there, home improvement enthusiasts! Ready to upgrade your sliding door’s security with a brand-new lock? We’ve got you covered with this easy-to-follow guide.
Materials and Tools
First things first, let’s gather our toolkit:
- Sliding door lock: The star of the show
- Screwdriver: Its mission is to tighten those screws
- Handle: If your lock comes with one, make sure it’s got its own set of screws
- Screws: Check the lock’s instructions for the right sizes and types
- Latch: It’s what keeps your door secure
- Strike plate: This metal plate plays catch with the latch
Installation Process
- Measure and Mark: Decide where you want that lock to live on your door frame and mark the spot.
- Drill Pilot Holes: Time to channel your inner carpenter and drill some small holes where you marked. Use a drill bit the same size as your screws.
- Install the Strike Plate: Position the strike plate on the door jamb and screw it down.
- Install the Lock: Slide that lock into the drilled holes and tighten the screws to keep it in place.
- Test the Lock: Open and close the door a few times. Does the lock latch and unlock smoothly? If yes, you’re a pro!
Safety Precautions
Safety first, always! Here are a few tips to keep in mind:
- Safety Glasses: Protect those peepers from splinters or flying debris.
- Drill with Care: Pay attention to where you’re drilling. You don’t want to hit any wires or pipes.
- Keep Tools Away from Kids: Let’s keep those sharp tools and tiny parts out of the hands of little ones.
Handle Installation (If Applicable)
If your lock has a handle, make sure you have these screws ready:
- Handle Mounting Screws: These will attach the handle to the lock.
- Lock Connecting Screws: These will hold the lock to the handle.
- Attach the Handle: Align the handle with the lock and secure it with the handle mounting screws.
- Connect the Lock: Insert the lock into the handle and tighten the lock connecting screws.
And there you have it, folks! Your sliding door is now locked and loaded. Stay safe and enjoy your newfound security.
How to Install a Sliding Door Lock: A Step-by-Step Guide for Beginners
Materials You’ll Need
Before you start, make sure you’ve gathered all the essentials:
- Sliding door lock (duh!)
- Screwdriver: Find a trusty screwdriver that aligns with the screw heads on your lock.
- Handle (if your lock comes with one): Don’t forget the screws to install it.
- Screws: Refer to your lock’s instructions for the screw sizes and types you’ll need.
- Latch: This little guy holds the door cozy with the frame.
- Strike plate: The metal plate that welcomes the latch when you close the door.
Step 1: Mark Your Spot
Time to decide where your lock will live. Measure and mark the location on the door frame. Precision is key here, folks!
Step 2: Drill Baby, Drill!
Use a drill bit that matches your screw size to drill small pilot holes at the marked locations. Don’t go overboard with the drilling!
Step 3: Strike Plate in Place
Place the strike plate on the door jamb and secure it with screws. Tip: Make sure it’s aligned with the latch.
Step 4: Lock Installation
Insert the lock into the drilled holes. Now, carefully tighten the screws to keep it securely in place. Don’t overtighten or you’ll risk damaging the lock.
Step 5: Test Time
Open and close the door. The lock should engage snugly with the strike plate. If it doesn’t, adjust the lock slightly until it works perfectly.
Safety First
- Safety glasses: Protect those peepers from flying debris.
- Careful drilling: Watch where you’re drilling, folks. Don’t hit any wires or pipes!
- Keep it away from kids: Sharp tools and small parts are a no-no for little hands.
There you have it, folks! Installing a sliding door lock is a piece of cake with these simple steps. Remember, measure twice, cut once (or drill once in this case), and you’ll be locking and unlocking your door like a pro in no time.
How to Install a Sliding Door Lock Like a Pro
Hey there, fellow home security enthusiasts! Today, we’re going to embark on a thrilling journey to install a sliding door lock that will make your home fortress-like. But fear not, this adventure is not for the faint of heart. It requires the courage of a warrior and the precision of a surgeon.
Chapter 1: Assembling Your Arsenal
Before we dive into the battle, let’s gather our trusty tools. You’ll need a mean screwdriver, sharp enough to conquer any screw. Don’t be stingy with the screws – make sure they’re the right size for the lock. And don’t forget the magnificent latch that will secure your door like a medieval knight.
Chapter 2: The Art of War
Now, it’s time to strategize. Measure the battlefield (the door frame) and mark the exact spot where your lock will reign supreme. Drill pilot holes like a seasoned warrior, precisely where you’ve marked. Next, position the strike plate, the guardian of the door jamb. Secure it with screws that will hold fast against all odds.
Chapter 3: Lock and Load
With the strike plate in place, it’s time to install the lock. Insert it into the holes like a master key, and tighten the screws with the precision of a watchmaker. Voila! Your door is now guarded by a formidable force.
Chapter 4: Testing Your Triumph
The final battle awaits. Open and close the door like a seasoned general. Does the lock engage with the strike plate with the smoothness of a thousand suns? If so, you have emerged victorious! Your home is now a fortress, safe from the prying eyes of intruders.
Chapter 5: Safety Precautions
Before we part ways, let’s not forget the wise words of our ancestors: “Safety first, my friend.” Wear safety glasses to protect your precious peepers. Handle your drill with the utmost care, and keep it away from electrical wires and plumbing. And finally, keep tools and small parts out of the reach of little adventurers.
Congratulations, valiant warriors! You have successfully installed a sliding door lock and secured your home like true champions. May your doors remain locked and your peace of mind undisturbed.
How to Install a Sliding Door Lock: A Step-by-Step Guide
Hey there, folks! Installing a sliding door lock is a breeze, and I’m here to guide you through the process like a pro. Before we dive in, let’s gather our essential tools and materials:
-
Sliding door lock: The star of the show!
-
Screwdriver: Choose one that matches the screw heads on the lock.
-
Handle: If your lock has one, don’t forget the screws.
-
Screws: Check the lock’s instructions for the right size and type.
-
Latch: This little guy keeps your door firmly in place.
-
Strike plate: The metal plate that receives the latch when the door is closed.
Now, let’s get down to *business*:
Installation Process
-
Measure and mark: Decide where you want your lock to shine, then mark the spot on the door frame.
-
Drill pilot holes: Grab your drill and create small holes at the marked locations. Use a drill bit that’s the same size as the screws.
-
Strike plate installation: Position the strike plate on the door jamb and secure it with the provided screws.
-
Lock installation: Slide your lock into the drilled holes and tighten the screws to keep it snug.
-
Test it out: Give your door a wiggle to ensure the lock engages perfectly with the strike plate.
Safety Precautions
Safety first, my friends! Here are some important tips to keep in mind:
-
Safety glasses: Protect your eyes from any flying debris or splinters.
-
Drill with caution: Pay attention to where you’re drilling and avoid hitting electrical wires or plumbing pipes.
-
Keep it away from kids: Sharp tools and small parts can be dangerous, so keep them out of reach.
And voila! You’re now the master of sliding door lock installation. If you encounter any hiccups along the way, don’t hesitate to slide into my DMs for assistance. Stay secure, folks!
How to Install a Sliding Door Lock: A Step-by-Step Guide for Beginners
Hey there, DIY enthusiasts and home improvement lovers! Are you tired of feeling like your sliding door is an open invitation to intruders? Fret not, for today, we’re diving into the world of door locks and guiding you through the process of installing one on your sliding door. So, grab your screwdriver, put on your safety glasses, and let’s get started!
Gather Your Arsenal
Before we plunge into the installation, let’s make sure we have all the necessary tools and materials:
- Sliding door lock: The star of the show! Choose one that matches your door and provides the security level you desire.
- Screwdriver: A trusty screwdriver with a bit that fits the screws on the lock.
- Handle: If your lock comes with a handle, don’t forget to grab it.
- Screws: Refer to the lock’s instructions to determine the size and type of screws you’ll need.
- Latch: This little guy is responsible for securing your door to the frame.
- Strike plate: The metal plate that your latch will snuggle into when the door is closed.
- Optional: Drill: If you don’t have pre-drilled holes on your door frame, a drill will make your life easier.
Measure and Mark the Lock’s Territory
Now that you have your tools, it’s time to decide where your lock will reside on the door frame. Use a pencil or masking tape to mark the location. Remember, it should be at a comfortable height for you to reach and engage the lock.
How to Install a Sliding Door Lock
Hey there, folks! Ready to elevate your home security with a sturdy sliding door lock? Let’s dive into this simple guide that will transform you into a DIY locksmith extraordinaire.
Materials and Tools
Gather your arsenal:
- Sliding door lock: The star of the show, naturally.
- Screwdriver: Pick the right size for those tiny screws.
- Handle: If it comes with one, make sure you have the right screws.
- Screws: Check the lock’s instructions for the specifics.
- Latch: The gatekeeper that keeps your door in place.
- Strike plate: The metal warden that receives the latch’s embrace.
Safety Precautions
Safety first, buddies!
- Safety glasses: Protect those peepers from any wayward splinters.
- Drill with caution: Keep an eye on where that drill bit goes, avoiding any hidden wires or pipes.
- Keep kids out of the zone: Sharp tools and small parts are not their toys.
Installation Process
1. Measure and Mark the Lock Location
Okay, here’s where your artistic flair comes in. Decide where you want that lock to reside on the door frame. Mark its spot with a pencil or a little doodle. Make sure it’s not too high or too low, but just right to keep the bad guys out.
2. Drill Pilot Holes
Grab your drill and a bit that matches the screw size. Carefully drill small holes at the marked locations, like the surgeon you never knew you were.
3. Install the Strike Plate
Position the strike plate on the door jamb, like a loyal door escort. Secure it with those provided screws, making sure it’s nice and sturdy.
4. Install the Lock
Time to bring in the heavy hitter! Insert the lock into the drilled holes, ensuring it fits snugly. Tighten those screws until they’re as solid as a rock.
5. Test the Lock
Now for the moment of truth! Open and close your door, feeling the satisfying click as the lock engages with the strike plate. If it’s like a lock-and-key romance, you’ve nailed it!
Drill pilot holes: Drill small holes at the marked locations using a drill bit that matches the screw size.
How to Install a Sliding Door Lock: A Foolproof Guide
Installing a sliding door lock may seem like a daunting task, but it’s actually a breeze with our step-by-step guide. Just grab your handy-dandy screwdriver and let’s get this show on the road!
Step 1: Gather Your Arsenal
Don’t start drilling without the right tools! You’ll need a trusty screwdriver, a sleek handle (if included), screws, a latch, and a strike plate. Pro tip: Check the lock’s instructions for the exact screw sizes and types.
Step 2: Mark Your Spot
Time to be precise! Measure and mark the desired location of the lock on the door frame like a boss. This is where your artistic eye comes in.
Step 3: Drill, Baby, Drill!
Now it’s time to get your drill on. Drill small pilot holes at the marked locations using a drill bit that matches the screw size. Remember, safety first! Wear safety glasses to protect your peepers.
Step 4: Strike it Right
Grab the strike plate and position it on the door jamb. Secure it tightly with those lovely screws you gathered earlier. This is the playground where the latch will play with the door.
Step 5: Lock it In
Insert the lock into the drilled holes. Don’t be shy, tighten those screws until it feels nice and snug. The lock should now be firmly in place, ready to keep intruders at bay.
Step 6: Test Drive
Last but not least, give your new lock a spin! Open and close the door to make sure the latch and strike plate are besties. If they work in perfect harmony, you’re a rock star!
Safety First, Always!
Hey, don’t forget about safety! Always wear safety glasses to avoid any flying debris or splinters. Pay attention to where you’re drilling to steer clear of electrical wires or plumbing pipes. And keep those tools and materials away from the little ones for their safety.
Install the Strike Plate: Securing the Door’s Anchor
Now, let’s talk about the strike plate. Think of it as the door’s loyal guardian, the one that keeps that pesky door from swinging wide open when you least expect it. To install this essential piece, you’ll need to do a little measuring and marking.
First, grab the *strike plate* and hold it against the door jamb, where you want the door to latch securely. Use a pencil or pen to mark the screw holes. Next, grab your drill and create some tiny pilot holes at the marked spots. These holes are like a roadmap for your screws, guiding them into place without any fuss.
Now, it’s time to give the strike plate its rightful home. Align it with the pilot holes and gently tighten the screws that came with the lockset. Make sure you give it a good snuggle, but not too tight, or you’ll end up stripping the screws. And there you have it, the strike plate is now the door’s unwavering sentinel, ready to protect your home from uninvited guests (or mischievous pets).
**How to Install a Sliding Door Lock: A Step-by-Step Guide for the Not-So-Handy**
Hey there, DIY enthusiasts! Ready to upgrade your sliding door’s security with a spiffy new lock? Don’t sweat it, folks. We’re here to hold your hand through the installation process like a trusty old pal. Let’s jump right in!
Materials and Tools
Before you grab your toolbox, make sure you’ve got all the right goodies:
- A shiny new sliding door lock
- Screwdriver: Pick one that grooves with the screw heads on the lock.
- Handle: If the lock comes with a handle, make sure it’s got screws for the ride.
- Screws: Check the lock’s instructions for the sizes and types you’ll need.
- Latch: This little guy keeps your door from sliding open like a rebellious teenager.
- Strike plate: It’s the metal pal that the latch hooks into when your door is shut.
Installation Process
Okay, time to get our hands dirty!
Step 1: Measure and Mark
Picture yourself as a secret agent. Stealthily measure and mark where you want your lock to live on the door frame.
Step 2: Drill Pilot Holes
Grab your fancy drill and a bit that matches your screw size. It’s like creating tiny tunnels for your screws to travel through.
Step 3: Install the Strike Plate
So, the strike plate is like the door’s friend. Position it on the door jamb and use those screws to make sure it’s nice and cozy.
Step 4: Install the Lock
Move on to the main event! Slide the lock into the drilled holes and give those screws a good ol’ twist. They’re the castle guards that will keep your lock in place.
Step 5: Test the Magic
Time to give your lock a high-five! Open and close the door to make sure it’s engaging properly with the strike plate. If it’s not, give those screws a little nudge until it’s smooth sailing.
Step 6: Safety First!
Safety is our top priority, my friends:
- Wear safety glasses: Protect those peepers from splinters or rogue drill bits.
- Drill with care: Keep an eye on the drill’s direction and avoid drilling into hidden wires or pipes.
- Keep tools out of reach: Little ones shouldn’t play with sharp stuff.
And there you have it, my fearless installers! Your sliding door is now sporting a snazzy new lock that’ll keep intruders out and peace of mind in. Cheers to a safer and more secure home, my fellow DIYers!
How to Install a Sliding Door Lock Like a Pro
Yo, check it! If you’re looking to boost your home security without breaking the bank, installing a sliding door lock is a money-saving DIY project you can tackle with ease. Just follow these simple steps, and you’ll be chillin’ in a safe and sound abode in no time.
Materials and Tools
Gather all your tools and materials before you start. You’ll need:
- Sliding door lock
- Screwdriver
- Handle (if included with the lock)
- Screws
- Latch
- Strike plate
- Measuring tape or ruler
- Pencil
- Drill
Installation Process
1. Mark the Spot
Figure out where you want your lock to chill on the door frame. Use a measuring tape and pencil to mark the location.
2. Drill It
Grab your drill and use a drill bit that matches the screw size. Drill small holes at the marked locations.
3. Strike It Rich
Place the strike plate on the door jamb and screw it into place. This is where the latch will hang out when the door is closed.
4. Lock It Down
Insert the lock into the drilled holes and tighten the screws to secure it. Double-check that it’s snug and sturdy.
5. Test Drive
Open and close the door a couple of times. Make sure the lock engages properly with the strike plate. If it slides smoothly and clicks into place, you’re good to go!
Safety Precautions
Safety first, dude!
- Eye Protection: Wear safety glasses to keep those peepers safe from flying stuff.
- Drill with Care: Be mindful of where you’re drilling. Avoid hitting any wires or pipes.
- Keep It Away from Kids: Keep your tools and materials out of reach of little ones.
Bam! You’ve installed your sliding door lock like a champ. Pat yourself on the back, you DIY wizard!
How to Install a Sliding Door Lock: A Step-by-Step Guide
Hey there, DIY enthusiasts! Ready to upgrade your sliding door security? Installing a sliding door lock is a breeze, and I’m here to guide you through it like a pro!
Materials You’ll Need
Before you start, gather all the essentials:
- Sliding door lock (duh!)
- Screwdriver: Find one that matches the screws on your lock.
- Handle: If it’s included, make sure you have the screws to attach it.
- Screws: Check the lock’s instructions for the right size and type.
- Latch: This bad boy secures your door to the frame.
- Strike plate: The metal plate that welcomes the latch when your door’s closed.
Safety First!
Let’s talk safety, folks. You don’t want to end up with a sore thumb or worse:
- Wear safety glasses: Keep your precious peepers protected from flying debris and splinters.
- Drill with caution: Stay focused and avoid drilling into wires or pipes.
- Keep tools out of reach: Protect your little ones by keeping sharp objects and small parts away.
Installation Process
It’s time to get down to business!
1. Measure and Mark the Lock Location:
Decide where you want that lock on your door frame and mark the spot with a pencil.
2. Drill Pilot Holes:
Grab your drill and drill some small holes at the marked locations. Use a bit that matches the screw size.
3. Install the Strike Plate:
Place the strike plate on the door jamb and screw it in tightly.
4. Install the Lock:
Now’s the star of the show. Insert the lock into the drilled holes and tighten the screws.
5. Test the Lock:
Open and close your door a few times to make sure the lock engages smoothly with the strike plate.
And there you have it, folks! A secure sliding door with a brand-new lock. Remember, DIY projects aren’t just about the final product; they’re also about the satisfaction of knowing you did it yourself!
How to Install a Sliding Door Lock: A Step-by-Step Guide for Home Safety
Are you tired of feeling unsafe in your own home because of an unlocked sliding door? Well, fear not, my fellow home security enthusiasts! I’m here to guide you through the effortless process of installing a sliding door lock that will keep your abode as secure as Fort Knox… or at least pretty darn close!
Step 2: Installation Process
Now, let’s get down to business!
Measure and Mark the Lock Location:
Grab a tape measure and decide where you want your lock to reside on the door frame. Mark the spot with a pencil or a marker that’s visible but not permanent (please, no sharpies!).
Drill Pilot Holes:
Time to whip out your trusty drill and a drill bit that’s the same size as the screws that came with the lock. Carefully drill small holes at the marked locations.
Install the Strike Plate:
The strike plate is the metal plate that the lock’s latch catches onto when the door is closed. Position it on the door jamb and secure it with the provided screws. Make sure you’re not drilling into electrical wires or plumbing pipes, because that would be a major “oops.”
Install the Lock:
Now, it’s the lock’s turn to shine! Insert it into the drilled holes and tighten the screws to secure it. Don’t overtighten, though, or you might damage the lock.
Test the Lock:
Open and close the door a few times to make sure the lock is working properly. The latch should smoothly engage with the strike plate, providing you with that sweet feeling of security.
Safety Precautions
Before you get started, let’s talk about safety, folks!
- Wear safety glasses: You don’t want metal shavings or splinters getting in your eyes.
- Use caution when drilling: Pay attention to where you’re drilling and make sure you’re not going to hit any wires or pipes.
- Keep tools and materials away from children: Kids and sharp tools are not a good mix, so keep them out of reach.
Keep tools and materials away from children: For their safety, keep sharp tools and small parts out of their reach.
How to Install a Sliding Door Lock: A Comprehensive Guide for the Safety-Conscious Homeowner
Materials and Tools
Before you dive into the installation process, gather these essential materials and tools:
- Sliding door lock: The star of the show! Choose the lock that best suits your needs and the door you’ll be installing it on.
- Screwdriver: Don’t forget this trusty companion. Make sure it’s the right size and type for the screws on your lock.
- Handle: If your lock includes a handle, check that you have the necessary screws for installation.
- Screws: Refer to the lock’s instructions for the specific screw sizes and types required.
- Latch: This sneaky little device keeps your door securely shut.
- Strike plate: The metal guardian that welcomes the latch when your door closes.
- Safety glasses: Protect your precious peepers from flying debris or sneaky splinters.
Installation Process
Now, let’s get to the fun part! Follow these steps for a smooth and secure installation:
Measure and Mark the Lock Location
- Determine the desired location of the lock. Remember, you’re the boss of your door, so place the lock where it feels right.
- Mark the position. Grab a pencil or marker and make a small mark at the center of the lock’s mounting hole.
Drill Pilot Holes
- Choose the right drill bit. It should be the same size as the screws you’ll be using.
- Drill small holes at the marked locations. Be careful, don’t drill too deep!
Install the Strike Plate
- Position the strike plate on the door jamb. Make sure it aligns with the latch on the lock.
- Secure it with the provided screws. Tighten them up nicely, but not so tight that you strip the heads.
Install the Lock
- Insert the lock into the drilled holes. Make sure it’s facing the right way!
- Tighten the screws to secure it. Give them a good snuggle, but avoid overtightening and stripping the screws.
Test the Lock
- Open and close the door. Give it a gentle push and pull.
- Ensure the lock engages properly with the strike plate. It should slide in and out smoothly, like a well-oiled machine.
Safety Precautions
Last but not least, let’s prioritize safety:
- Wear safety glasses: You don’t want to lose an eye over a sliding door lock!
- Use caution when drilling: Keep an eye on the drill’s direction and avoid drilling into electrical wires or plumbing pipes.
- Keep tools and materials away from children: Sharp tools and small parts can be dangerous for little hands. Keep them out of reach for their safety.
